Widely Used Wood Shaving Chip Sawdust Dryer For Sale
Introduction of Sawdust Dryer:
1)Drying is important before Briquette process.It is necessary to control the moisture of material at 8-12% exactly.In order to get superior quality of biomass briquette with high density.
2)The selection of dryer model depends on the original moisture content of raw materials.
3)Wood dryer is suitable for drying materials like sawdust,rice hull,milling wheat straw,corn stalk etc.Raw materials size:<1mm&<5mm.
Description of Sawdust Dryer
Pipe dryer is very important for further briquetting/Pelletizing process. To get the superior quality of biomass with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.
The Advantage of Wood Dryer:
1.
Strong drying strength: high aire flow speed, the material can disperse well.
2.
Air drying time is short: drying time is about 0.5 to 5 seconds, the heat sensitivity or low melting point material will not cause overheating or decomposition to affect its quality.
3.
Airflow dryer has high thermal efficiency: airflow drying material and air flow cocurrent operation, the material and air temperature can reach a reasonable state, the drying time is short, which can use a higher drying temperature.
4.
Wide range applications, high yield, large precipitation; simple structure, small station area, low investment and maintenance costs.
5.
Air air Source:furnace, gas stove, coal stove, steam heat exchanger.
Specification of Sawdust Dryer
| Model |
LB-H-260(A) |
LB-H-300(A) |
LB-H-350(A) |
LB-H-400(A) |
| Initial moisture |
25%-30% |
25%-30% |
25%-30% |
25%-30% |
| Final Drying Moisture |
10%-15% |
10%-15% |
10%-15% |
10%-15% |
| Fan power |
4KW |
7.5KW |
11KW |
15KW |
| Drying Pipe Diamet |
260MM |
300MM |
350MM |
400MM |
| Cyclone diameter |
780MM |
900MM |
1050MM |
1200MM |
| Installment Dimensions |
9M*2.5M*3M |
16M*3M*3.2M |
18M*3M*3.3M |
20M*3M*3.5M |
| Direct Hot Wind Stove Size |
1600*900*1150MM |
2000*1000*1300MM |
2100*1020*1300MM |
2200*1050*1400MM |
| Fuel (firewood) Consumption |
40-50KG/H |
60-80KG/H |
80-100KG/H |
100-150KG/H |
| Drying Speed |
180-250KG/H |
300-400KG/H |
600-800KG/H |
800-1000KG/H |
| Machine Weight |
1760KG |
2660KG |
3200KG |
4000KG |
| Power Supply |
3P 380V 50HZ |
3P 380V 50HZ |
3P 380V 50HZ |
3P 380V 50HZ |
Principle of Sawdust Dryer
In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.
Raw material
It is suitable for dryingsensitive material like sawdust, rice hull, milledwheat straw, milled cotton / corn stalksand so on.
FAQ
(1). What is Your Raw Materials or Tell Us Your Materials Moisture Content?
-----Different moisture content of your raw materials, with different size of Rotary Drum Sawdust Dryer for you.
We need to know what is your raw materials, moisture content of it? and final capacity demand?
(2).What is Your Fuel for Rotary Drying Machine?
-----There are kinds of biomass could be Fuel for Rotary Drying Machine, if you have special demands please let us know. Like: Automatic Feeding Fuel for Rotary Drying Machine or not?
(3).Rotary Drying Machine Adjustable Items:
-----Feeding Heat Temperature Could Adjustable, Rotation Speed Adjustable.
All according to your raw materials information, moisture content and capacity demands.
Audited Supplier 
){kind=link}