Cylinder High Heat Temperature Rotary Drum Sawdust Dryer

• Movement Way: Combined
• Heating Mode: Transmission
• Drying Medium: Effluent Gases
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LB-650*10
• Operation Pressure: Vacuum Dryer
• Type: Single Layer Drum Cyliner Dryer
• Composition: Stove and Rotary Drum
• Length and Drum Dryer: 20m
• Dimension(mm): 20*3*3.2m
• Main Power(Kw): 7.5kw
• Cylinder Power(Kw): 2.2kw
• Max Diameter of Cyliner(mm): 900mm
• Min Diameter of Cyliner(mm): 300mm
• Capacity: 400-500kg/H
• Keywords: 400-500
• Structure: Rotary Type Drier
• Transport Package: HDF
• Specification: CE SGS
• Trademark: LEABON
• Origin: Zhengzhou, Henan, China
• HS Code: 8419399090
• Production Capacity: 400-500kg/H
• Package Size: 1.00cm * 1.00cm * 1.00cm
• Package Gross Weight: 1.000kg

Product Description

Brief Introduction of Wood Dryer:
It is suitable for dryingsensitive material like sawdust, rice hull, milledwheat straw, milled cotton / corn stalksand so on.
It is made up of heat stove, tube, impulse jar, function tube, fan, and cycloneseparator.
It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.
(Note: If the moisture of raw materials is more than 45%, the furnace required the bigger, please inform us when ordering.)

 

The Description of Wood Dryer:
Pipe drier is very important for further briquetting/Pelletizing process. To get the superior quality of biomass with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

 
The Main Specification of Wood Dryer:

Item	LB-260A	LB-300A	LB-350A
Drying speed (kgs/h)	200-250	300-400	600-700
Main power (Kw)	4	7.5-11	11
Max diameter (mm)	780	900	1050
Min diameter (mm)	260	300	350
Furnace (mm)	1600*900*1150mm; 1230kgs	2000*1000*1300mm; 1450kgs	2100*1020*1330mm; 1750kgs
Route (m)	18	26	35
Dimension (m)	9*2.5*3.1	16*2.5*3.2	22*3*3.3
Total weight	1760kgs	2660kgs	3460kgs
Hot air temperature	150-200ºC
Moisture content before drying	40%-50%
Moisture content after drying	8%-12%
Airflow velocity	8m/s

The Advantage of Wood Dryer:
1. Strong drying strength: high aire flow speed, the material can disperse well.
2. Air drying time is short:  drying time is about 0.5 to 5 seconds, the heat sensitivity or low melting point material will not cause overheating or decomposition to affect its quality.
3. Airflow dryer has high thermal efficiency: airflow drying material and air flow cocurrent operation,  the material and air temperature can reach a reasonable state, the drying time is short, which can use a higher drying temperature.
4. Wide range applications, high yield, large precipitation; simple structure, small station area, low investment and maintenance costs.
5. Air air Source:furnace, gas stove, coal stove, steam heat exchanger.

The Principle of Wood Dryer
In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.

The Spare Parts of Wood Dryer
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock.

Wood Dryer for wood pellet line:


Detail Quotation Solutions for you, we need to know Informations as Follows: 
(1). What is Your Raw Materials or Tell Us Your Materials Moisture Content?
-----Different moisture content of your raw materials, with different size of Rotary Drum Sawdust Dryer for you. 
We need to know what is your raw materials, moisture content of it? and final capacity demand? 
(2).What is Your Fuel for Rotary Drying Machine?
-----There are kinds of biomass could be Fuel for Rotary Drying Machine, if you have special demands please let us know. Like: Automatic Feeding Fuel for Rotary Drying Machine or not? 
(3).Rotary Drying Machine Adjustable Items:
-----Feeding Heat Temperature Could Adjustable, Rotation Speed Adjustable.
All according to your raw materials information, moisture content and capacity demands.

Related Products of Woodworking Machinery
1. Hot Sale Wood Pellet Mill
This wood pellet machine is suitable for making biomass particles such as sawdust, rice husk, paddy straw, sunflower stalk, hulls, forestry wastes pellet, etc.
2. Production Flow Chart of Complete 1T Biomass Wood Pelleting Plant Manufacturers
Wood Cutting --- Sawdust Grinding ---- Drying ---- Pellet Making --- Cooling & Screening ---- Packing

Introduction	Complete 1T Biomass Wood Pelleting Plant Manufacturers is the process of making waste materials into solid fuel. The biomass pellet mainly used for fuel.
Suitable material	Agricultural waste, and forest or wood residues from furnatures, such as sawdust, waste pallets, rice husks, corn cobs, maize stalks, peanut shells, wood logs, and etc.
Size	3-5mm, 10-15% moisture
Pellet size	6-12mm

Company Introduction:
We Zhengzhou LEABON are specialized in produing the wood pellet machine, feed pellet machine and the pellet product line-------Wood debarker, wood chipper, wood crusher, cooler, dryer, pack machine, baler etc. And also the filter press, wood briquette machine.
We can offer you the professional support and advice on the using of the machine. With the high quality and also the competitive price, our company have established many oversea clients. You are welcomed to vist our company and know more about the products.