- Model NO.: LBGT
- Operational Method: Continuous
- Drying Medium: Air
- Heating Mode: Dielectric
- Type of Flow: Contra-Flow
- Sprayer: Air-Flowing Type
- Diameter of Roller: 1.6 Meters
- Cyclone Separator: 0.75kw Airlock
- Discharging Belt Conveyor: 5m Long, 40cm Width
- Trademark: LEABON
- Specification: CE, SGS
- HS Code: 8474
- Structure: Rotary Type Drier
- Operation Pressure: Atmospheric Dryer
- Appearance of Dried Sample: Sawdust
- Movement Way: Combined
- Type of Atomization: Rotary Atomization
- Model: Lbgt-1615
- Reduce Moisture Content: From 50% to 15%
- Feeding Belt Conveyor: 6m Long, 40cm Width
- Heating Furnace: Optional
- Transport Package: 1 X 40 Container
- Origin: Zhengzhou, Henan, China
The rotary drying machine is composed of stove, main rotary body, which reduces the moisture from 60% to 10%. The moisture evaporating capacity of our rotary drum dryer can reach to (250kg per hour to 8000kg) per hour. Different density materials, the final product are not the same; Also for different moisture of raw materials, which could get the different final capacity.
1). Air heating system is able to allow highly efficient removal of water from fresh harvested forage, and the maximum durability of dehydrated forage.
2). Non-pollution to the target materials guarantees minimal loss of their color, favor, and nutritional ingredients;
3). Smoke collector working with the air heating system adopts water-recycled wet-type collecting method, and ensures the exhausted gas to satisfy the environmental protection requirement as well as the lowest water consumption.
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line.
The materials enter from the higher end, and the heat carrier enters from the lower ender; The two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material. Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.
|Final moisture(%)||12-15% ( adjusting )|
|Size of wooddust (mm)||5-8mm screen size|
|Total motor power(kw)||28||34||45||78||85||110||125||135|
Welcome to visit our website!!!