- Model NO.: BX- 318
- Model: Bx- 318
- Knife Roller Dia(Mm): 800
- Input Openner(Mm): 680*270
- Chips Size: 10-40mm(Adjustable)
- Rotary Speed/Rpm: 650
- Trademark: LEABON
- Origin: Henan, China
- Certification: CE, SGS
- Capacity: 15-25t/H
- Knife Qty: 2-4PCS
- Input Dia(Mm): 250
- Power(Kw): 110+14.7
- Machine Size (L*W*H) (Mm: 350*218*1800
- Specification: CE, SGS
- HS Code: 8479300000
A--------What is your raw material and the material diameter
B-----The capacity you want
C-------The final product size requirement (thicknes and the lenght)
B-----The driving types
The motor or the diesel drive
B-----what's your voltage requirement (we can produce the machine voltage as your requirement)
II. Our Service:
1. CE certificate
2. Two years warranty without the spareparts
3. Professional and timely online service
III. Brief introduction of the drum wood chipper
A----Leabon drum type wood Chipper Machine is mainly used to crush big wood logs or timber wood branches, furniture waste, bamboo, cotton stalks, and other non-wood fiber stems into
Small chips, the outlet chips diamension will be10mm-35mm(adjustable by adjusting knives gap), length and width about 20-50mm
B----- Leabon drum type wood Chipper Machine contains feeding belt conveyor and outlet conveyor, when conveying logs, the speed can be adjusted. Then the whole machine can get the whole automatic effect.
C------ Leabon drum type wood Chipper Machine doesn't need to make foundation. This new humanized design saved many manpower and money for clients.
D------- Leabon drum type wood Chipper Machine has knives grinder, which can grind knives newer after certain time, then your have no need to change knives often.
E------- Leabon drum type wood Chipper Machine has limit feeding door dimension. The largest diameter of our machine is 300mm. But length no limit, feeding speed can be adjusted. Certainly, if you have the specially requirement of the input diameter, we can also customize for you.
F------- Leabon drum type wood Chipper Machine is made up of body, knife roller, the upper and lower feed roller, conveyor belt, hydraulic system.
IV. Working Principle
It consists engine base, cutter roller, feeding roller, conveyor and hydraulic system and so on. The engine base is welded by high strength steel plate,
It's the supporting base of the whole machine. On the cutter roller, there installs two or three flying cutter. Through the professional bolt, fixed the flying cutters on the roller.
According to the thickness of the raw materials, the feeding roller can moves up and down through the helping of hydraulic system. The satisfied chips can be discharged at the bottom of the machine through the screen.
The bigger chips will be cutted again in the chamber of machine.
Furthermore, we also offer the disk wood chipper, this types are most suitable for the log, wood log.
|Model||BX-315||BX-- 316||BX- 318||BX- 2113||BX- 2116|
|Knife Roller Dia(mm)||500||650||800||1300||1600|
|Chips Size||10-35mm (Adjustable)||10-40mm(Adjustable)|
|Power(Kw)||45+8.9||45 or 55+11||110+14.7||220+17||350+24|
Machine Size (L*W*H)